Hi Tzirf,

at first thank you for all the tutorials and Videos of The WiiU Nand-Aid Stuff.
I have a Black Zelda Limited WiiU from 2013.
The Console becomes the 160-103 when i want to start a Game or the System Settings.
The vWii was working fine.
So i was Buld in The Nand-Aid as i saw on your Website and i follow your Video Tutorial.


Things i done:
Load recover_menue with UDPIH and create a Backup of the MLC/SLC
Install ISFSHax successfully and minute_menu starts after i turned the console on.
i installed the Nand-Aid as you can see on the Photo.
All soldering points i checked with the Multimeter and they should be fine.



https://ibb.co/z8xvCG2

I Created the nandimage and wrote this with echer on an 32GB FAT32 Formated micro SD card.
Now comes my Problem:
The WiiU starts in the normal WiiU Software but not the minute_menu.
When i turn on the WiiU the LED flashes Puple, than Organge und then Purpble Again.
i also was trying to load the minute_menue again with the recovery menu but it does not work.

Did you have any Idea why i cant run the minute_menu?

Wft* you want believe what i done wrong or what does goes wrong!
-->Worked before i installed the Nand-Aid.
Now i Use a Sony 2GB SD Card....all the time before i was using a micro sdxc card with 32GB

If you do not have the correct firmware on the SD Card you will not be able to load the minute menu because it cannot find the fw.img to load. Make sure you are using the fw.img that isn't encrypted. It could also be the SD Card you are using, as some of them cause this problem.

If your console is able to boot into the Wii U Menu and is functioning there is nothing wrong with the NAND-AID. It is working. You wouldn't be able to boot into the Wii U Menu if there was a problem with the NAND-AID.

Hi,
thank you for your answer.
The Problem was the Size of the SD Card.
32GB is the highest value was working for me with the minute menu.
Just the Recovery men works with every of my SD Cards.

Excellent!! Glad you figured it out.